The First Aluminium Composite Panel Factory in the sultanate of oman

Fire Retardant Composite Panels are manufactured using fire retardant mineral core conforming to CLASS A (Core) as
per ASTME84, Class B-s1, dO as per EN 13501-1 .This product range is manufactured using a high grade of Aluminum Alloys (E.g. AL1100 or AL3003 or AL 3105) to ensure lower oxidation and superior non-corrosive cladding system for high-end architectural requirements in commercial and public buildings. The external Aluminum surface is coated with 2 and/or 3 coats system in PVDF (Poly Vinylidene Di fluoride) paints using special purpose base primer coatings to ensure superior performance under severe and harsh weather conditions for extended periods Our standard product range is offered with a guarantee up to 20 years depending up on the specifications and color finishes for all-weather-condition from hot & humid of the Middle East to extreme cold & dry weather of other continents.

Curtain Walls and Internal Wall Finishes
• External Wall Cladding, Building Fascia and Façade Finishes
• Rooftop Edges, Parapet Walls and Wall Canopies
• Spandrel, Column Covers and Beam Wraps
• Balconies and Patio Wall Claddings
• Partition and Ceiling Panels
• Stairways, Elevators and Kiosk Panels
• Advertising Display Sign Boards
• Public and Commercial Display Walls
• Poster Hoardings and Exhibition Rooms
• Shop Sign Boards and Showroom Finishes
• Machine Casings and Furniture Accessories

PARAMETERSASTM STD.UNITTolerance ±Exterior 4mm
Thickness of Panel[mm]±0.204.00
Width of Panel[mm]±2.004.00
Weight of Panel[kg/m²]± 5 %7.80
Specific Gravity of PanelASTM D 792[g/cm³]±5%1.40
Adhesive Film Thicknessμm±1070
Protective Film Thicknessμm±885
PARAMETERSASTM STD.UNITTolerance ±Exterior 4mm
Thickness of Skin[mm]±0.020.50
Standard Width[mm]±21000, 1250, 1500
Aluminum AlloyASTM B209MAA 3000, 5000 series
TemperASTM B209MH18/H16
Tensile StrengthASTM E8[N/mm2]±5150
0.2% Proof StressASTM E8[N/mm2]±5120
ElongationASTM E8[%]±25
Surface FinishPVDF Coated
Dry Film Thickness (Coating)ASTM D7091μm±525 to 28
Gloss ( at 60°angle)ASTM D523GU±530
Chemical Resistance (5% HCL -24 hrs)ASTM D 1308VisualPassesPasses
Cross HatchASTM D 3359VisualPasses100/100 (No Color Peel off)
Reverse Impact (50 cm)ASTM D 2794cmPassesPasses
Solvent Rub Test (MEK test)ASTM D 5402DRPassesNo Decoloration, Passes
Pencil Hardness TestASTM D 3363HBPasses2HB, Passes
Humidity TestASTM D 2247%PassesNo Color Peel off, Passes
T-Bend FlexibilityASTM D 4145TPasses>2T
Sound Transmission Loss RwASTM E413[db]26
Sound Absortion FactorISO354sabin0.05
PARAMETERSASTM STD.UNITTolerance ±Exterior 4mm
Heat Transition Coefficient UASTM C1363[W/m²K]5.53
Linear Thermal Expansion ASTM D696[mm/m/°C]3×10⁻⁵°c
Theral ResistanceASTM C518M²-KW0.03
Temprature ResistanceASTM C518[°C]-50…+80
PARAMETERSASTM STD.Certificate#Tolerance ±Exterior 4mm
Core Material Non Combustible fire retardant core
Surface Burning CharechteristicsASTM E84 Class B1
Fire Propogation of Exterior Non Load Bearing Wall AssembliesNFPA 285:2012TBW0300597Pass
Reaction to Fire TestEN 13501-1TBW0300596B,S1,d0
Ignition TemperatureASTM D1929-16 & ENPanel 483°C, Core 501°C
Fire RatingASTM E119  450°C
PARAMETERSASTM STD.Certificate#Tolerance ±Exterior 4mm
Tensile StrengthASTM D638Mpa48
Modulus of elasticityASTM D638Mpa 
ElongationASTM E8%5
Flatwise compressionASTM C365Mpa 
Flexural Regidity, ExlASTM C393kNmm²/mm133.8
Flexural Elastisity, EASTM C393kN/mm²37.2
Impact ResistanceEN 13523Jules/GTO4
PeelingASTM D903-98N/mm±211
PARAMETERSASTM STD.Certificate#Tolerance ±Exterior 4mm
AdherenceDIN53151   There is no loss of adherence
BondingASTM 605.2-91  24hrs no bubble
Resistance to HumidityASTM D714-97, ASTM D2247-02  3000 hrs no bubble
Resistance to Boiling WaterASTM D3359B  Approved
Resistance to Salt Water SprayASTM B117-03  3000 hrs no bubble
Resistance to AcidASTM D1308-87,  ASTM 605.2-91 test#7  without defect
Resistance to AlkalineASTM D1308-87  Approved
Resistance to SolventASTM D2248-73 ECCA T5&NCCA NO. 11-18Approved
Resistance to smutASTM D4214-93  Doesnot become smut
Brightness RetentionASTM D2244-93% 84.2

Remarks: Standard test value, other vales can be accepted if the finish requires it and doesnot effect the product quality